dotfiles/dot_config/polybar/modules.ini

898 lines
32 KiB
INI
Raw Normal View History

2022-12-22 04:07:12 -05:00
[module/alsa]
type = internal/alsa
; Soundcard to be used
; Usually in the format hw:# where # is the card number
; You can find the different card numbers in `/proc/asound/cards`
master-soundcard = default
speaker-soundcard = default
headphone-soundcard = default
; Name of the master, speaker and headphone mixers
; Use the following command to list available mixer controls:
; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
; If master, speaker or headphone-soundcard isn't the default,
; use `amixer -c # scontrols` instead where # is the number
; of the master, speaker or headphone soundcard respectively
;
; Default: Master
master-mixer = Master
; Optionally define speaker and headphone mixers
; Default: none
;speaker-mixer = Speaker
; Default: none
;headphone-mixer = Headphone
; NOTE: This is required if headphone_mixer is defined
; Use the following command to list available device controls
; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
; You may also need to use `amixer -c # controls` as above for the mixer names
; Default: none
;headphone-id = 9
; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
; Default: false
mapped = true
; Interval for volume increase/decrease (in percent points)
; Default: 5
interval = 5
; Available tags:
; <label-volume> (default)
; <ramp-volume>
; <bar-volume>
format-volume = <ramp-volume> <label-volume>
; Available tags:
; <label-muted> (default)
; <ramp-volume>
; <bar-volume>
format-muted = <label-muted>
format-muted-prefix =
format-muted-prefix-foreground = ${color.red}
; Available tokens:
; %percentage% (default)
label-volume = %percentage%%
; Available tokens:
; %percentage% (default)
label-muted = " Muted"
label-muted-foreground = ${color.sep}
; Only applies if <ramp-volume> is used
ramp-volume-0 =
ramp-volume-1 =
ramp-volume-2 =
ramp-volume-foreground = ${color.blue}
; If defined, it will replace <ramp-volume> when
; headphones are plugged in to `headphone_control_numid`
; If undefined, <ramp-volume> will be used for both
; Only applies if <ramp-volume> is used
ramp-headphones-0 =
ramp-headphones-1 =
ramp-headphones-foreground = ${color.blue}
[module/battery0]
type = internal/battery
; This is useful in case the battery never reports 100% charge
full-at = 99
; Use the following command to list batteries and adapters:
; $ ls -1 /sys/class/power_supply/
battery = BAT0
adapter = AC
; If an inotify event haven't been reported in this many
; seconds, manually poll for new values.
;
; Needed as a fallback for systems that don't report events
; on sysfs/procfs.
;
; Disable polling by setting the interval to 0.
;
; Default: 5
poll-interval = 2
; see "man date" for details on how to format the time string
; NOTE: if you want to use syntax tags here you need to use %%{...}
; Default: %H:%M:%S
time-format = %H:%M
; Available tags:
; <label-charging> (default)
; <bar-capacity>
; <ramp-capacity>
; <animation-charging>
format-charging = <animation-charging> <label-charging>
; Available tags:
; <label-discharging> (default)
; <bar-capacity>
; <ramp-capacity>
; <animation-discharging>
format-discharging = <ramp-capacity> <label-discharging>
; Available tags:
; <label-full> (default)
; <bar-capacity>
; <ramp-capacity>
format-full = <label-full>
format-full-prefix =
format-full-prefix-foreground = ${color.dark-green}
; Available tokens:
; %percentage% (default)
; %time%
; %consumption% (shows current charge rate in watts)
label-charging = %percentage%%
; Available tokens:
; %percentage% (default)
; %time%
; %consumption% (shows current discharge rate in watts)
label-discharging = %percentage%%
; Available tokens:
; %percentage% (default)
label-full = " Full"
; Only applies if <ramp-capacity> is used
ramp-capacity-0 =
ramp-capacity-1 =
ramp-capacity-2 =
ramp-capacity-3 =
ramp-capacity-4 =
ramp-capacity-foreground = ${color.dark-yellow}
; Only applies if <bar-capacity> is used
;bar-capacity-width = 10
; Only applies if <animation-charging> is used
animation-charging-0 =
animation-charging-1 =
animation-charging-2 =
animation-charging-3 =
animation-charging-4 =
animation-charging-foreground = ${color.green}
; Framerate in milliseconds
animation-charging-framerate = 750
; Only applies if <animation-discharging> is used
animation-discharging-0 =
animation-discharging-1 =
animation-discharging-2 =
animation-discharging-3 =
animation-discharging-4 =
; Framerate in milliseconds
animation-discharging-framerate = 500
[module/battery1]
type = internal/battery
; This is useful in case the battery never reports 100% charge
full-at = 89
; Use the following command to list batteries and adapters:
; $ ls -1 /sys/class/power_supply/
battery = BAT1
adapter = AC
; If an inotify event haven't been reported in this many
; seconds, manually poll for new values.
;
; Needed as a fallback for systems that don't report events
; on sysfs/procfs.
;
; Disable polling by setting the interval to 0.
;
; Default: 5
poll-interval = 2
; see "man date" for details on how to format the time string
; NOTE: if you want to use syntax tags here you need to use %%{...}
; Default: %H:%M:%S
time-format = %H:%M
; Available tags:
; <label-charging> (default)
; <bar-capacity>
; <ramp-capacity>
; <animation-charging>
format-charging = <animation-charging> <label-charging>
; Available tags:
; <label-discharging> (default)
; <bar-capacity>
; <ramp-capacity>
; <animation-discharging>
format-discharging = <ramp-capacity> <label-discharging>
; Available tags:
; <label-full> (default)
; <bar-capacity>
; <ramp-capacity>
format-full = <label-full>
format-full-prefix =
format-full-prefix-foreground = ${color.dark-green}
; Available tokens:
; %percentage% (default)
; %time%
; %consumption% (shows current charge rate in watts)
label-charging = %percentage%%
; Available tokens:
; %percentage% (default)
; %time%
; %consumption% (shows current discharge rate in watts)
label-discharging = %percentage%%
; Available tokens:
; %percentage% (default)
label-full = " Full"
; Only applies if <ramp-capacity> is used
ramp-capacity-0 =
ramp-capacity-1 =
ramp-capacity-2 =
ramp-capacity-3 =
ramp-capacity-4 =
ramp-capacity-foreground = ${color.dark-yellow}
; Only applies if <bar-capacity> is used
;bar-capacity-width = 10
; Only applies if <animation-charging> is used
animation-charging-0 =
animation-charging-1 =
animation-charging-2 =
animation-charging-3 =
animation-charging-4 =
animation-charging-foreground = ${color.green}
; Framerate in milliseconds
animation-charging-framerate = 750
; Only applies if <animation-discharging> is used
animation-discharging-0 =
animation-discharging-1 =
animation-discharging-2 =
animation-discharging-3 =
animation-discharging-4 =
; Framerate in milliseconds
animation-discharging-framerate = 500
[module/bspwm]
type = internal/bspwm
; Only show workspaces defined on the same output as the bar
; NOTE: The bspwm and XRandR monitor names must match, which they do by default.
; Default: true
pin-workspaces = true
; Output mode flags after focused state label
; Default: false
;;inline-mode = false
; Create click handler used to focus workspace
; Default: true
enable-click = true
; Create scroll handlers used to cycle workspaces
; Default: true
enable-scroll = true
; Set the scroll cycle direction
; Default: true
;;reverse-scroll = false
; Use fuzzy (partial) matching on labels when assigning
; icons to workspaces
; Example: code;♚ will apply the icon to all workspaces
; containing 'code' in the label
; Default: false
;;fuzzy-match = true
; ws-icon-[0-9]+ = label;icon
; Note that the label needs to correspond with the bspwm workspace name
;;ws-icon-0 = code;♚
;;ws-icon-1 = office;♛
;;ws-icon-2 = graphics;♜
;;ws-icon-3 = mail;♝
;;ws-icon-4 = web;♞
;;ws-icon-default = ♟
; Available tags:
; <label-monitor>
; <label-state> - gets replaced with <label-(focused|urgent|occupied|empty)>
; <label-mode> - gets replaced with <label-(monocle|tiled|fullscreen|floating|locked|sticky|private)>
; Default: <label-state>
format = <label-state> <label-mode>
; Available tokens:
; %name%
; Default: %name%
label-monitor = %name%
; If any values for label-dimmed-N are defined, the workspace/mode
; colors will get overridden with those values if the monitor is out of focus
; To only override workspaces in a specific state, use:
; label-dimmed-focused
; label-dimmed-occupied
; label-dimmed-urgent
; label-dimmed-empty
;;label-dimmed-foreground = #555
;;label-dimmed-underline = ${bar/top.background}
;;label-dimmed-focused-background = #f00
; Available tokens:
; %name%
; %icon%
; %index%
; Default: %icon% %name%
label-focused = %icon%
label-focused-foreground = ${color.foreground}
label-focused-background = ${color.background}
;label-focused-underline = #fba922
; Available tokens:
; %name%
; %icon%
; %index%
; Default: %icon% %name%
label-occupied = %icon%
;label-occupied-underline = #555555
; Available tokens:
; %name%
; %icon%
; %index%
; Default: %icon% %name%
label-urgent = %icon%
label-urgent-foreground = ${color.white}
label-urgent-background = ${color.red}
;label-urgent-underline = #9b0a20
; Available tokens:
; %name%
; %icon%
; %index%
; Default: %icon% %name%
label-empty = %icon%
label-empty-foreground = ${color.foreground}
; The following labels will be used to indicate the layout/mode
; for the focused workspace. Requires <label-mode>
;
; Available tokens:
; None
label-monocle =
label-tiled =
label-fullscreen =
label-floating =
label-pseudotiled = P
label-locked =
label-locked-foreground = #bd2c40
label-sticky =
label-sticky-foreground = #fba922
label-private =
label-private-foreground = #bd2c40
; Separator in between workspaces
label-separator = |
label-separator-padding = 2
label-separator-foreground = ${color.sep}
[module/cpu]
type = internal/cpu
; Seconds to sleep between updates
; Default: 1
interval = 1
; Available tags:
; <label> (default)
; <bar-load>
; <ramp-load>
; <ramp-coreload>
;;format = <label> <ramp-coreload>
format = <label>
format-prefix =
format-prefix-foreground = ${color.red}
; Available tokens:
; %percentage% (default) - total cpu load averaged over all cores
; %percentage-sum% - Cumulative load on all cores
; %percentage-cores% - load percentage for each core
; %percentage-core[1-9]% - load percentage for specific core
label = " %percentage%%"
; Spacing between individual per-core ramps
;;ramp-coreload-spacing = 1
;;ramp-coreload-0 = ${cpu.load0}
;;ramp-coreload-1 = ${cpu.load1}
;;ramp-load-0 = ${cpu.load0}
;;ramp-load-1 = ${cpu.load1}i
[module/date]
type = internal/date
; Seconds to sleep between updates
interval = 1.0
; See "http://en.cppreference.com/w/cpp/io/manip/put_time" for details on how to format the date string.
; NOTE: if you want to use syntax tags here you need to use %%{...}
date = %a, %d %b
; Optional time format
2023-03-27 16:51:29 -04:00
time = @ %R
2022-12-22 04:07:12 -05:00
; if `date-alt` or `time-alt` is defined, clicking
; the module will toggle between formats
2023-03-23 20:48:16 -04:00
date-alt = %m/%d
time-alt = %R
2022-12-22 04:07:12 -05:00
; Available tags:
; <label> (default)
2023-03-23 20:48:16 -04:00
format = %{A3:gsimplecal:} <label> %{A}
2022-12-22 04:07:12 -05:00
format-prefix = " "
format-prefix-foreground = ${color.red}
; Available tokens:
; %date%
; %time%
; Default: %date%
label = %date% %time%
[module/filesystem]
type = internal/fs
; Mountpoints to display
mount-0 = /
#mount-1 = /home
;mount-2 = /var
; Seconds to sleep between updates
; Default: 30
interval = 30
; Display fixed precision values
; Default: false
fixed-values = true
; Spacing between entries
; Default: 2
spacing = 0
; Available tags:
; <label-mounted> (default)
; <bar-free>
; <bar-used>
; <ramp-capacity>
format-mounted = <label-mounted>
format-mounted-prefix =
format-mounted-prefix-foreground = ${color.dark-green}
; Available tags:
; <label-unmounted> (default)
format-unmounted = <label-unmounted>
format-unmounted-prefix =
format-unmounted-prefix-foreground = ${color.red}
; Available tokens:
; %mountpoint%
; %type%
; %fsname%
; %percentage_free%
; %percentage_used%
; %total%
; %free%
; %used%
; Default: %mountpoint% %percentage_free%%
2023-04-02 02:37:11 -04:00
label-mounted = " %used% / %total% "
2022-12-22 04:07:12 -05:00
; Available tokens:
; %mountpoint%
; Default: %mountpoint% is not mounted
label-unmounted = " %mountpoint%: NA"
[module/memory]
type = internal/memory
; Seconds to sleep between updates
; Default: 1
interval = 5
; Available tags:
; <label> (default)
; <bar-used>
; <bar-free>
; <ramp-used>
; <ramp-free>
; <bar-swap-used>
; <bar-swap-free>
; <ramp-swap-used>
; <ramp-swap-free>
format = <label>
format-prefix =
format-prefix-foreground = ${color.blue}
; Available tokens:
; %percentage_used% (default)
; %percentage_free%
; %gb_used%
; %gb_free%
; %gb_total%
; %mb_used%
; %mb_free%
; %mb_total%
; %percentage_swap_used%
; %percentage_swap_free%
; %mb_swap_total%
; %mb_swap_free%
; %mb_swap_used%
; %gb_swap_total%
; %gb_swap_free%
; %gb_swap_used%
2023-04-02 02:37:11 -04:00
label = " %mb_used% / %gb_total%"
2022-12-22 04:07:12 -05:00
; Only applies if <ramp-used> is used
;;ramp-used-0 = ${memory.used0}
;;ramp-used-1 = ${memory.used1}
;;ramp-used-2 = ${memory.used2}
; Only applies if <ramp-free> is used
;;ramp-free-0 = ${memory.free0}
;;ramp-free-1 = ${memory.free1}
;;ramp-free-2 = ${memory.free2}
; If you use both a wired and a wireless network, just add 2 module definitions.
[module/wired-network]
type = internal/network
interface = eth0
[module/wireless-network]
type = internal/network
interface = wlp4s0
; Normal Module
[module/network]
type = internal/network
2023-04-02 02:37:11 -04:00
interface = wlan0
2022-12-22 04:07:12 -05:00
; Seconds to sleep between updates
; Default: 1
interval = 1.0
; Test connectivity every Nth update
; A value of 0 disables the feature
; NOTE: Experimental (needs more testing)
; Default: 0
;ping-interval = 3
; @deprecated: Define min width using token specifiers (%downspeed:min% and %upspeed:min%)
; Minimum output width of upload/download rate
; Default: 3
;;udspeed-minwidth = 5
; Accumulate values from all interfaces
; when querying for up/downspeed rate
; Default: false
2023-04-02 02:37:11 -04:00
accumulate-stats = false
2022-12-22 04:07:12 -05:00
; Consider an `UNKNOWN` interface state as up.
; Some devices have an unknown state, even when they're running
; Default: false
2023-04-02 02:37:11 -04:00
unknown-as-up = false
2022-12-22 04:07:12 -05:00
; Available tags:
; <label-connected> (default)
; <ramp-signal>
format-connected = <label-connected>
; Available tags:
; <label-disconnected> (default)
format-disconnected = <label-disconnected>
format-disconnected-prefix =
format-disconnected-prefix-foreground = ${color.dark-yellow}
; Available tags:
; <label-connected> (default)
; <label-packetloss>
; <animation-packetloss>
;;format-packetloss = <animation-packetloss> <label-connected>
; Available tokens:
; %ifname% [wireless+wired]
; %local_ip% [wireless+wired]
; %local_ip6% [wireless+wired]
; %essid% [wireless]
; %signal% [wireless]
; %upspeed% [wireless+wired]
; %downspeed% [wireless+wired]
; %linkspeed% [wired]
; Default: %ifname% %local_ip%
2023-04-02 02:37:11 -04:00
label-connected = " %signal%%  %upspeed%  %downspeed%"
2022-12-22 04:07:12 -05:00
label-connected-foreground = ${color.magenta}
; Available tokens:
; %ifname% [wireless+wired]
; Default: (none)
label-disconnected = "Offline"
label-disconnected-foreground = ${color.dark-red}
; Available tokens:
; %ifname% [wireless+wired]
; %local_ip% [wireless+wired]
; %local_ip6% [wireless+wired]
; %essid% [wireless]
; %signal% [wireless]
; %upspeed% [wireless+wired]
; %downspeed% [wireless+wired]
; %linkspeed% [wired]
; Default: (none)
;label-packetloss = %essid%
;label-packetloss-foreground = #eefafafa
; Only applies if <ramp-signal> is used
;ramp-signal-0 = 
;ramp-signal-1 = 
;ramp-signal-2 = 
;ramp-signal-3 = 
;ramp-signal-foreground = ${color.purple}
; Only applies if <animation-packetloss> is used
;;animation-packetloss-0 = ⚠
;;animation-packetloss-0-foreground = #ffa64c
;;animation-packetloss-1 = ⚠
;;animation-packetloss-1-foreground = #000000
; Framerate in milliseconds
;;animation-packetloss-framerate = 500
[module/pulseaudio]
type = internal/pulseaudio
; Sink to be used, if it exists (find using `pacmd list-sinks`, name field)
; If not, uses default sink
sink = alsa_output.pci-0000_12_00.3.analog-stereo
; Use PA_VOLUME_UI_MAX (~153%) if true, or PA_VOLUME_NORM (100%) if false
; Default: true
use-ui-max = true
; Interval for volume increase/decrease (in percent points)
; Default: 5
interval = 5
; Available tags:
; <label-volume> (default)
; <ramp-volume>
; <bar-volume>
format-volume = <ramp-volume> <label-volume>
; Available tags:
; <label-muted> (default)
; <ramp-volume>
; <bar-volume>
format-muted = <label-muted>
format-muted-prefix =
format-muted-prefix-foreground = ${color.red}
; Available tokens:
; %percentage% (default)
; %decibels%
label-volume = %percentage%%
; Available tokens:
; %percentage% (default)
; %decibels%
label-muted = " Muted"
label-muted-foreground = ${color.sep}
; Only applies if <ramp-volume> is used
ramp-volume-0 =
ramp-volume-1 =
ramp-volume-2 =
ramp-volume-foreground = ${color.dark-blue}
; Right and Middle click
click-right = pavucontrol
; click-middle =
[module/temperature]
type = internal/temperature
; Seconds to sleep between updates
; Default: 1
interval = 5
; Thermal zone to use
; To list all the zone types, run
; $ for i in /sys/class/thermal/thermal_zone*; do echo "$i: $(<$i/type)"; done
; Default: 0
thermal-zone = 1
; Full path of temperature sysfs path
; Use `sensors` to find preferred temperature source, then run
; $ for i in /sys/class/hwmon/hwmon*/temp*_input;
; do echo "$(<$(dirname $i)/name): $(cat ${i%_*}_label 2>/dev/null ||
; echo $(basename ${i%_*})) $(readlink -f $i)"; done
; to find path to desired file
; Default reverts to thermal zone setting
;;hwmon-path = /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input
hwmon-path = /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input
;hwmon-path = /sys/class/hwmon/hwmon1/temp1_input
; Threshold temperature to display warning label (in degrees celsius)
; Default: 80
warn-temperature = 84
; Whether or not to show units next to the temperature tokens (°C, °F)
; Default: true
units = true
; Available tags:
; <label> (default)
; <ramp>
format = <ramp> <label>
; Available tags:
; <label-warn> (default)
; <ramp>
format-warn = <ramp> <label-warn>
; Available tokens:
; %temperature% (deprecated)
; %temperature-c% (default, temperature in °C)
; %temperature-f% (temperature in °F)
label = %temperature-c%
; Available tokens:
; %temperature% (deprecated)
; %temperature-c% (default, temperature in °C)
; %temperature-f% (temperature in °F)
label-warn = "%temperature-c%"
label-warn-foreground = ${color.red}
; Requires the <ramp> tag
; The icon selection will range from 0 to `warn-temperature`
; with the current temperature as index.
ramp-0 =
ramp-1 =
ramp-2 =
ramp-3 =
ramp-4 =
ramp-foreground = ${color.cyan}
[module/keyboard]
type = internal/xkeyboard
; List of indicators to ignore
blacklist-0 = num lock
blacklist-1 = scroll lock
; Available tags:
; <label-layout> (default)
; <label-indicator> (default)
format = <label-layout> <label-indicator>
format-prefix =
format-prefix-foreground = ${color.magenta}
; Available tokens:
; %layout%
; %name%
; %number%
; Default: %layout%
label-layout = " %layout%"
; Available tokens:
; %name%
; Default: %name%
label-indicator-on = "%name%"
label-indicator-on-foreground = ${color.white}
label-indicator-on-background = ${color.dark-red}
[module/title]
type = internal/xwindow
; Available tags:
; <label> (default)
format = <label>
format-prefix =
format-foreground = ${color.foreground}
; Available tokens:
; %title%
; Default: %title%
label = " %title%"
label-maxlen = 30
; Used instead of label when there is no window title
label-empty = " Desktop"
[module/workspaces]
type = internal/xworkspaces
; Only show workspaces defined on the same output as the bar
;
; Useful if you want to show monitor specific workspaces
; on different bars
;
; Default: false
pin-workspaces = true
; Create click handler used to focus desktop
; Default: true
enable-click = true
; Create scroll handlers used to cycle desktops
; Default: true
enable-scroll = true
; icon-[0-9]+ = <desktop-name>;<icon>
; NOTE: The desktop name needs to match the name configured by the WM
; You can get a list of the defined desktops using:
; $ xprop -root _NET_DESKTOP_NAMES
icon-0 = 1;
icon-1 = 2;
icon-2 = 3;
icon-3 = 4;
icon-4 = 5;
icon-5 = 6;
icon-6 = 7;
icon-7 = 8;
;
icon-8 = 9;
icon-9 = 10;
icon-default =
; Available tags:
; <label-monitor>
; <label-state> - gets replaced with <label-(active|urgent|occupied|empty)>
; Default: <label-state>
format = <label-state>
; Available tokens:
; %name%
; Default: %name%
label-monitor = %name%
; Available tokens:
; %name%
; %icon%
; %index%
; Default: %icon% %name%
label-active = %icon%
label-active-foreground = ${color.red}
; Available tokens:
; %name%
; %icon%
; %index%
; Default: %icon% %name%
label-occupied = %icon%
label-occupied-foreground = ${color.cyan}
; Available tokens:
; %name%
; %icon%
; %index%
; Default: %icon% %name%
label-urgent = %icon%
label-urgent-foreground = ${color.dark-red}
; Available tokens:
; %name%
; %icon%
; %index%
; Default: %icon% %name%
label-empty = %icon%
label-empty-foreground = ${color.foreground}
label-active-padding = 1
label-urgent-padding = 1
label-occupied-padding = 1
label-empty-padding = 1