Remove gammastep

dot_config/gammastep/config.ini

@@ -1,69 +0,0 @@
-; Global settings
-[general]
-; Set the day and night screen temperatures
-temp-day=5700
-temp-night=3500
-
-; Disable the smooth fade between temperatures when Redshift starts and stops.
-; 0 will cause an immediate change between screen temperatures.
-; 1 will gradually apply the new screen temperature over a couple of seconds.
-fade=1
-
-; Solar elevation thresholds.
-; By default, Redshift will use the current elevation of the sun to determine
-; whether it is daytime, night or in transition (dawn/dusk). When the sun is
-; above the degrees specified with elevation-high it is considered daytime and
-; below elevation-low it is considered night.
-;elevation-high=3
-;elevation-low=-6
-
-; Custom dawn/dusk intervals.
-; Instead of using the solar elevation, the time intervals of dawn and dusk
-; can be specified manually. The times must be specified as HH:MM in 24-hour
-; format.
-;dawn-time=6:00-7:45
-;dusk-time=18:35-20:15
-
-; Set the screen brightness. Default is 1.0.
-;brightness=0.9
-; It is also possible to use different settings for day and night
-; since version 1.8.
-;brightness-day=0.7
-;brightness-night=0.4
-; Set the screen gamma (for all colors, or each color channel
-; individually)
-gamma=0.9
-;gamma=0.8:0.7:0.8
-; This can also be set individually for day and night since
-; version 1.10.
-;gamma-day=0.8:0.7:0.8
-;gamma-night=0.6
-
-; Set the location-provider: 'geoclue2', 'manual'.
-; The location provider settings are in a different section.
-location-provider=manual
-
-; Set the adjustment-method: 'randr', 'vidmode', 'drm', 'wayland'.
-; 'randr' is the preferred X11 method, 'vidmode' is an older API
-; that works in some cases when 'randr' does not.
-; The adjustment method settings are in a different section.
-adjustment-method=wayland
-
-; Configuration of the location-provider:
-; type 'gammastep -l PROVIDER:help' to see the settings.
-; ex: 'gammastep -l manual:help'
-; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
-; are negative numbers.
-[manual]
-lat=41.5
-lon=81.7
-
-; Configuration of the adjustment-method
-; type 'gammastep -m METHOD:help' to see the settings.
-; ex: 'gammastep -m randr:help'
-; In this example, randr is configured to adjust only screen 0.
-; Note that the numbering starts from 0, so this is actually the first screen.
-; If this option is not specified, Redshift will try to adjust _all_ screens.
-;[randr]
-;screen=0
-