dotfiles/config/polybar/modules.ini

[module/alsa]
type = internal/alsa

; Soundcard to be used
; Usually in the format hw:# where # is the card number
; You can find the different card numbers in `/proc/asound/cards`
master-soundcard = default
speaker-soundcard = default
headphone-soundcard = default

; Name of the master, speaker and headphone mixers
; Use the following command to list available mixer controls:
; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
; If master, speaker or headphone-soundcard isn't the default, 
; use `amixer -c # scontrols` instead where # is the number 
; of the master, speaker or headphone soundcard respectively
;
; Default: Master
master-mixer = Master

; Optionally define speaker and headphone mixers
; Default: none
;speaker-mixer = Speaker
; Default: none
;headphone-mixer = Headphone

; NOTE: This is required if headphone_mixer is defined
; Use the following command to list available device controls
; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
; You may also need to use `amixer -c # controls` as above for the mixer names
; Default: none
;headphone-id = 9

; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
; Default: false
mapped = true

; Interval for volume increase/decrease (in percent points)
; Default: 5
interval = 5

; Available tags:
;   <label-volume> (default)
;   <ramp-volume>
;   <bar-volume>
format-volume = <ramp-volume> <label-volume>

; Available tags:
;   <label-muted> (default)
;   <ramp-volume>
;   <bar-volume>
format-muted = <label-muted>
format-muted-prefix = 
format-muted-prefix-foreground = ${color.red}

; Available tokens:
;   %percentage% (default)
label-volume = %percentage%%

; Available tokens:
;   %percentage% (default)
label-muted = " Muted"
label-muted-foreground = ${color.sep} 

; Only applies if <ramp-volume> is used
ramp-volume-0 = 
ramp-volume-1 = 
ramp-volume-2 = 
ramp-volume-foreground = ${color.blue}

; If defined, it will replace <ramp-volume> when
; headphones are plugged in to `headphone_control_numid`
; If undefined, <ramp-volume> will be used for both
; Only applies if <ramp-volume> is used
ramp-headphones-0 = 
ramp-headphones-1 = 
ramp-headphones-foreground = ${color.blue}

[module/battery0]                                                              
type = internal/battery                                                       
                                                                              
; This is useful in case the battery never reports 100% charge                
full-at = 99                                                                  
                                                                              
; Use the following command to list batteries and adapters:                   
; $ ls -1 /sys/class/power_supply/                                            
battery = BAT0                                                                
adapter = AC                                                                
                                                                              
; If an inotify event haven't been reported in this many                      
; seconds, manually poll for new values.                                      
;                                                                             
; Needed as a fallback for systems that don't report events                   
; on sysfs/procfs.                                                            
;                                                                             
; Disable polling by setting the interval to 0.                               
;                                                                             
; Default: 5                                                                  
poll-interval = 2                                                             
                                                                              
; see "man date" for details on how to format the time string                 
; NOTE: if you want to use syntax tags here you need to use %%{...}           
; Default: %H:%M:%S                                                           
time-format = %H:%M

; Available tags:                                                             
;   <label-charging> (default)                                                
;   <bar-capacity>                                                            
;   <ramp-capacity>                                                           
;   <animation-charging>                                                      
format-charging = <animation-charging> <label-charging>                       
; Available tags:                                                             
;   <label-discharging> (default)
;   <bar-capacity>
;   <ramp-capacity>
;   <animation-discharging>
format-discharging = <ramp-capacity> <label-discharging>

; Available tags:
;   <label-full> (default)
;   <bar-capacity>
;   <ramp-capacity>
format-full = <label-full>
format-full-prefix = 
format-full-prefix-foreground = ${color.dark-green}

; Available tokens:
;   %percentage% (default)
;   %time%
;   %consumption% (shows current charge rate in watts)
label-charging = %percentage%%

; Available tokens:
;   %percentage% (default)
;   %time%
;   %consumption% (shows current discharge rate in watts)
label-discharging = %percentage%%

; Available tokens:
;   %percentage% (default)
label-full = " Full"

; Only applies if <ramp-capacity> is used
ramp-capacity-0 = 
ramp-capacity-1 = 
ramp-capacity-2 = 
ramp-capacity-3 = 
ramp-capacity-4 = 
ramp-capacity-foreground = ${color.dark-yellow}

; Only applies if <bar-capacity> is used
;bar-capacity-width = 10

; Only applies if <animation-charging> is used
animation-charging-0 = 
animation-charging-1 = 
animation-charging-2 = 
animation-charging-3 = 
animation-charging-4 = 
animation-charging-foreground = ${color.green}
; Framerate in milliseconds
animation-charging-framerate = 750

; Only applies if <animation-discharging> is used
animation-discharging-0 = 
animation-discharging-1 = 
animation-discharging-2 = 
animation-discharging-3 = 
animation-discharging-4 = 
; Framerate in milliseconds
animation-discharging-framerate = 500

[module/battery1]                                                              
type = internal/battery                                                       
                                                                              
; This is useful in case the battery never reports 100% charge                
full-at = 89                                                                  
                                                                              
; Use the following command to list batteries and adapters:                   
; $ ls -1 /sys/class/power_supply/                                            
battery = BAT1                                                                
adapter = AC                                                                
                                                                              
; If an inotify event haven't been reported in this many                      
; seconds, manually poll for new values.                                      
;                                                                             
; Needed as a fallback for systems that don't report events                   
; on sysfs/procfs.                                                            
;                                                                             
; Disable polling by setting the interval to 0.                               
;                                                                             
; Default: 5                                                                  
poll-interval = 2                                                             
                                                                              
; see "man date" for details on how to format the time string                 
; NOTE: if you want to use syntax tags here you need to use %%{...}           
; Default: %H:%M:%S                                                           
time-format = %H:%M

; Available tags:                                                             
;   <label-charging> (default)                                                
;   <bar-capacity>                                                            
;   <ramp-capacity>                                                           
;   <animation-charging>                                                      
format-charging = <animation-charging> <label-charging>                       
; Available tags:                                                             
;   <label-discharging> (default)
;   <bar-capacity>
;   <ramp-capacity>
;   <animation-discharging>
format-discharging = <ramp-capacity> <label-discharging>

; Available tags:
;   <label-full> (default)
;   <bar-capacity>
;   <ramp-capacity>
format-full = <label-full>
format-full-prefix = 
format-full-prefix-foreground = ${color.dark-green}

; Available tokens:
;   %percentage% (default)
;   %time%
;   %consumption% (shows current charge rate in watts)
label-charging = %percentage%%

; Available tokens:
;   %percentage% (default)
;   %time%
;   %consumption% (shows current discharge rate in watts)
label-discharging = %percentage%%

; Available tokens:
;   %percentage% (default)
label-full = " Full"

; Only applies if <ramp-capacity> is used
ramp-capacity-0 = 
ramp-capacity-1 = 
ramp-capacity-2 = 
ramp-capacity-3 = 
ramp-capacity-4 = 
ramp-capacity-foreground = ${color.dark-yellow}

; Only applies if <bar-capacity> is used
;bar-capacity-width = 10

; Only applies if <animation-charging> is used
animation-charging-0 = 
animation-charging-1 = 
animation-charging-2 = 
animation-charging-3 = 
animation-charging-4 = 
animation-charging-foreground = ${color.green}
; Framerate in milliseconds
animation-charging-framerate = 750

; Only applies if <animation-discharging> is used
animation-discharging-0 = 
animation-discharging-1 = 
animation-discharging-2 = 
animation-discharging-3 = 
animation-discharging-4 = 
; Framerate in milliseconds
animation-discharging-framerate = 500

[module/bspwm]                                                              
type = internal/bspwm                                                       
                                                                              
; Only show workspaces defined on the same output as the bar                  
; NOTE: The bspwm and XRandR monitor names must match, which they do by default.
; Default: true                                                               
pin-workspaces = true                                                       
                                                                              
; Output mode flags after focused state label                                 
; Default: false                                                              
;;inline-mode = false                                                         
                                                                              
; Create click handler used to focus workspace                                
; Default: true                                                               
enable-click = true                                                        
                                                                              
; Create scroll handlers used to cycle workspaces                             
; Default: true                                                               
enable-scroll = true                                                       
                                                                              
; Set the scroll cycle direction                                              
; Default: true                                                               
;;reverse-scroll = false                                                      
                                                                              
; Use fuzzy (partial) matching on labels when assigning                       
; icons to workspaces                                                         
; Example: code;♚ will apply the icon to all workspaces                       
; containing 'code' in the label                                              
; Default: false                                                              
;;fuzzy-match = true

; ws-icon-[0-9]+ = label;icon                                                 
; Note that the label needs to correspond with the bspwm workspace name       
;;ws-icon-0 = code;♚                                                          
;;ws-icon-1 = office;♛                                                        
;;ws-icon-2 = graphics;♜                                                      
;;ws-icon-3 = mail;♝                                                          
;;ws-icon-4 = web;♞                                                           
;;ws-icon-default = ♟                                                         
                                                                              
; Available tags:                                                             
;   <label-monitor>                                                           
;   <label-state> - gets replaced with <label-(focused|urgent|occupied|empty)>
;   <label-mode> - gets replaced with <label-(monocle|tiled|fullscreen|floating|locked|sticky|private)>
; Default: <label-state>                                                      
format = <label-state> <label-mode>                                         
                                                                              
; Available tokens:                                                           
;   %name%                                                                    
; Default: %name%                                                             
label-monitor = %name%                                                      
                                                                              
; If any values for label-dimmed-N are defined, the workspace/mode            
; colors will get overridden with those values if the monitor is out of focus 
; To only override workspaces in a specific state, use:                       
;   label-dimmed-focused                                                      
;   label-dimmed-occupied                                                     
;   label-dimmed-urgent                                                       
;   label-dimmed-empty                                                        
;;label-dimmed-foreground = #555                                              
;;label-dimmed-underline = ${bar/top.background}                              
;;label-dimmed-focused-background = #f00

; Available tokens:                                                           
;   %name%                                                                    
;   %icon%
;   %index%
; Default: %icon%  %name%
label-focused = %icon%
label-focused-foreground = ${color.foreground}
label-focused-background = ${color.background} 
;label-focused-underline = #fba922

; Available tokens:
;   %name%
;   %icon%
;   %index%
; Default: %icon%  %name%
label-occupied = %icon%
;label-occupied-underline = #555555

; Available tokens:
;   %name%
;   %icon%
;   %index%
; Default: %icon%  %name%
label-urgent = %icon%
label-urgent-foreground = ${color.white} 
label-urgent-background = ${color.red}
;label-urgent-underline = #9b0a20

; Available tokens:
;   %name%
;   %icon%
;   %index%
; Default: %icon%  %name%
label-empty = %icon%
label-empty-foreground = ${color.foreground}

; The following labels will be used to indicate the layout/mode
; for the focused workspace. Requires <label-mode>
;
; Available tokens:
;   None
label-monocle = 
label-tiled = 
label-fullscreen = 
label-floating = 
label-pseudotiled = P
label-locked = 
label-locked-foreground = #bd2c40
label-sticky = 
label-sticky-foreground = #fba922
label-private = 
label-private-foreground = #bd2c40

; Separator in between workspaces
label-separator = |
label-separator-padding = 2
label-separator-foreground = ${color.sep}

[module/cpu]
type = internal/cpu

; Seconds to sleep between updates
; Default: 1
interval = 1

; Available tags:
;   <label> (default)
;   <bar-load>
;   <ramp-load>
;   <ramp-coreload>
;;format = <label> <ramp-coreload>
format = <label>
format-prefix = 
format-prefix-foreground = ${color.red}

; Available tokens:
;   %percentage% (default) - total cpu load averaged over all cores
;   %percentage-sum% - Cumulative load on all cores
;   %percentage-cores% - load percentage for each core
;   %percentage-core[1-9]% - load percentage for specific core
label = " %percentage%%"

; Spacing between individual per-core ramps
;;ramp-coreload-spacing = 1
;;ramp-coreload-0 = ${cpu.load0}
;;ramp-coreload-1 = ${cpu.load1}

;;ramp-load-0 = ${cpu.load0}
;;ramp-load-1 = ${cpu.load1}i

[module/date]
type = internal/date

; Seconds to sleep between updates
interval = 1.0

; See "http://en.cppreference.com/w/cpp/io/manip/put_time" for details on how to format the date string.
; NOTE: if you want to use syntax tags here you need to use %%{...}
date = %a, %d %b

; Optional time format
time = at %I:%M %p

; if `date-alt` or `time-alt` is defined, clicking
; the module will toggle between formats
;date-alt = It's %A, %d %B %Y
;time-alt = at %k:%M:%S

; Available tags:
;   <label> (default)
format = %{A1:gsimplecal:} <label> %{A}
format-prefix = " "
format-prefix-foreground = ${color.red}

; Available tokens:
;   %date%
;   %time%
; Default: %date%
label = %date% %time%

[module/filesystem]
type = internal/fs

; Mountpoints to display
mount-0 = /
#mount-1 = /home
;mount-2 = /var

; Seconds to sleep between updates
; Default: 30
interval = 30

; Display fixed precision values
; Default: false
fixed-values = true

; Spacing between entries
; Default: 2
spacing = 0

; Available tags:
;   <label-mounted> (default)
;   <bar-free>
;   <bar-used>
;   <ramp-capacity>
format-mounted = <label-mounted>
format-mounted-prefix =  
format-mounted-prefix-foreground = ${color.dark-green}

; Available tags:
;   <label-unmounted> (default)
format-unmounted = <label-unmounted>
format-unmounted-prefix = 
format-unmounted-prefix-foreground = ${color.red}

; Available tokens:
;   %mountpoint%
;   %type%
;   %fsname%
;   %percentage_free%
;   %percentage_used%
;   %total%
;   %free%
;   %used%
; Default: %mountpoint% %percentage_free%%
label-mounted = " %mountpoint% %percentage_used%% Used "

; Available tokens:
;   %mountpoint%
; Default: %mountpoint% is not mounted
label-unmounted = " %mountpoint%: NA"

[module/memory]                                                               
type = internal/memory                                                        
                                                                              
; Seconds to sleep between updates                                            
; Default: 1                                                                  
interval = 5                                                                  
                                                                              
; Available tags:                                                             
;   <label> (default)                                                         
;   <bar-used>                                                                
;   <bar-free>                                                                
;   <ramp-used>                                                               
;   <ramp-free>                                                               
;   <bar-swap-used>                                                           
;   <bar-swap-free>                                                           
;   <ramp-swap-used>                                                          
;   <ramp-swap-free>                                                          
format = <label>                                                              
format-prefix =                                                              
format-prefix-foreground = ${color.blue}                                      
                                                                              
; Available tokens:                                                           
;   %percentage_used% (default)                                               
;   %percentage_free%                                                         
;   %gb_used%                                                                 
;   %gb_free%                                                                 
;   %gb_total%                                                                
;   %mb_used%                                                                 
;   %mb_free%                                                                 
;   %mb_total%                                                                
;   %percentage_swap_used%                                                    
;   %percentage_swap_free%                                                    
;   %mb_swap_total%                                                           
;   %mb_swap_free%                                                            
;   %mb_swap_used%                                                            
;   %gb_swap_total%
;   %gb_swap_free%
;   %gb_swap_used%

label = " %mb_used%"

; Only applies if <ramp-used> is used
;;ramp-used-0 = ${memory.used0}
;;ramp-used-1 = ${memory.used1}
;;ramp-used-2 = ${memory.used2}

; Only applies if <ramp-free> is used
;;ramp-free-0 = ${memory.free0}
;;ramp-free-1 = ${memory.free1}
;;ramp-free-2 = ${memory.free2}

; If you use both a wired and a wireless network, just add 2 module definitions.
[module/wired-network]
type = internal/network
interface = eth0

[module/wireless-network]
type = internal/network
interface = wlp4s0

; Normal Module
[module/network]
type = internal/network
interface = wlp4s0

; Seconds to sleep between updates
; Default: 1
interval = 1.0

; Test connectivity every Nth update
; A value of 0 disables the feature
; NOTE: Experimental (needs more testing)
; Default: 0
;ping-interval = 3

; @deprecated: Define min width using token specifiers (%downspeed:min% and %upspeed:min%)
; Minimum output width of upload/download rate
; Default: 3
;;udspeed-minwidth = 5

; Accumulate values from all interfaces
; when querying for up/downspeed rate
; Default: false
accumulate-stats = true

; Consider an `UNKNOWN` interface state as up.
; Some devices have an unknown state, even when they're running
; Default: false
unknown-as-up = true

; Available tags:
;   <label-connected> (default)
;   <ramp-signal>
format-connected = <label-connected>

; Available tags:
;   <label-disconnected> (default)
format-disconnected = <label-disconnected>
format-disconnected-prefix = 
format-disconnected-prefix-foreground = ${color.dark-yellow}

; Available tags:
;   <label-connected> (default)
;   <label-packetloss>
;   <animation-packetloss>
;;format-packetloss = <animation-packetloss> <label-connected>

; Available tokens:
;   %ifname%    [wireless+wired]
;   %local_ip%  [wireless+wired]
;   %local_ip6% [wireless+wired]
;   %essid%     [wireless]
;   %signal%    [wireless]
;   %upspeed%   [wireless+wired]
;   %downspeed% [wireless+wired]
;   %linkspeed% [wired]
; Default: %ifname% %local_ip%
label-connected = " %essid% %downspeed:10%"
label-connected-foreground = ${color.magenta}
; Available tokens:
;   %ifname%    [wireless+wired]
; Default: (none)
label-disconnected = "Offline"
label-disconnected-foreground = ${color.dark-red}
; Available tokens:
;   %ifname%    [wireless+wired]
;   %local_ip%  [wireless+wired]
;   %local_ip6% [wireless+wired]
;   %essid%     [wireless]
;   %signal%    [wireless]
;   %upspeed%   [wireless+wired]
;   %downspeed% [wireless+wired]
;   %linkspeed% [wired]
; Default: (none)
;label-packetloss = %essid%
;label-packetloss-foreground = #eefafafa

; Only applies if <ramp-signal> is used
;ramp-signal-0 = 
;ramp-signal-1 = 
;ramp-signal-2 = 
;ramp-signal-3 = 
;ramp-signal-foreground = ${color.purple}

; Only applies if <animation-packetloss> is used
;;animation-packetloss-0 = ⚠
;;animation-packetloss-0-foreground = #ffa64c
;;animation-packetloss-1 = ⚠
;;animation-packetloss-1-foreground = #000000
; Framerate in milliseconds
;;animation-packetloss-framerate = 500

[module/pulseaudio]
type = internal/pulseaudio

; Sink to be used, if it exists (find using `pacmd list-sinks`, name field)
; If not, uses default sink
sink = alsa_output.pci-0000_12_00.3.analog-stereo

; Use PA_VOLUME_UI_MAX (~153%) if true, or PA_VOLUME_NORM (100%) if false
; Default: true
use-ui-max = true

; Interval for volume increase/decrease (in percent points)
; Default: 5
interval = 5

; Available tags:
;   <label-volume> (default)
;   <ramp-volume>
;   <bar-volume>
format-volume = <ramp-volume> <label-volume>

; Available tags:
;   <label-muted> (default)
;   <ramp-volume>
;   <bar-volume>
format-muted = <label-muted>
format-muted-prefix = 
format-muted-prefix-foreground = ${color.red}

; Available tokens:
;   %percentage% (default)
;   %decibels%
label-volume = %percentage%%

; Available tokens:
;   %percentage% (default)
;   %decibels%
label-muted = " Muted"
label-muted-foreground = ${color.sep}

; Only applies if <ramp-volume> is used
ramp-volume-0 = 
ramp-volume-1 = 
ramp-volume-2 = 
ramp-volume-foreground = ${color.dark-blue}

; Right and Middle click
click-right = pavucontrol
; click-middle =

[module/temperature]
type = internal/temperature

; Seconds to sleep between updates
; Default: 1
interval = 5

; Thermal zone to use
; To list all the zone types, run 
; $ for i in /sys/class/thermal/thermal_zone*; do echo "$i: $(<$i/type)"; done
; Default: 0
thermal-zone = 1

; Full path of temperature sysfs path
; Use `sensors` to find preferred temperature source, then run
; $ for i in /sys/class/hwmon/hwmon*/temp*_input; 
; do echo "$(<$(dirname $i)/name): $(cat ${i%_*}_label 2>/dev/null || 
; echo $(basename ${i%_*})) $(readlink -f $i)"; done
; to find path to desired file
; Default reverts to thermal zone setting
;;hwmon-path = /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input
hwmon-path = /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input
;hwmon-path = /sys/class/hwmon/hwmon1/temp1_input 

; Threshold temperature to display warning label (in degrees celsius)         
; Default: 80                                                                 
warn-temperature = 84                                                         
                                                                              
; Whether or not to show units next to the temperature tokens (°C, °F)        
; Default: true                                                               
units = true                                                                  
                                                                              
; Available tags:                                                             
;   <label> (default)                                                         
;   <ramp>                                                                    
format = <ramp> <label>                                                       
                                                                              
; Available tags:                                                             
;   <label-warn> (default)                                                    
;   <ramp>                                                                    
format-warn = <ramp> <label-warn>                                             
                                                                              
; Available tokens:                                                           
;   %temperature% (deprecated)                                                
;   %temperature-c%   (default, temperature in °C)                            
;   %temperature-f%   (temperature in °F)                                     
label = %temperature-c%                                                       
                                                                              
; Available tokens:                                                           
;   %temperature% (deprecated)                                                
;   %temperature-c%   (default, temperature in °C)                            
;   %temperature-f%   (temperature in °F)                                     
label-warn = "%temperature-c%"                                                
label-warn-foreground = ${color.red}

; Requires the <ramp> tag                                                     
; The icon selection will range from 0 to `warn-temperature`                  
; with the current temperature as index.                                      
ramp-0 =                                                                     
ramp-1 =                                                                     
ramp-2 =                                                                     
ramp-3 = 
ramp-4 = 
ramp-foreground = ${color.cyan}

[module/keyboard]
type = internal/xkeyboard

; List of indicators to ignore
blacklist-0 = num lock
blacklist-1 = scroll lock

; Available tags:
;   <label-layout> (default)
;   <label-indicator> (default)
format = <label-layout> <label-indicator>
format-prefix =  
format-prefix-foreground = ${color.magenta}

; Available tokens:
;   %layout%
;   %name%
;   %number%
; Default: %layout%
label-layout = " %layout%"

; Available tokens:
;   %name%
; Default: %name%
label-indicator-on = "%name%"
label-indicator-on-foreground = ${color.white}
label-indicator-on-background = ${color.dark-red}

[module/title]
type = internal/xwindow

; Available tags:
;   <label> (default)
format = <label>
format-prefix = 
format-foreground = ${color.foreground}

; Available tokens:
;   %title%
; Default: %title%
label = " %title%"
label-maxlen = 30

; Used instead of label when there is no window title
label-empty = " Desktop"

[module/workspaces]
type = internal/xworkspaces

; Only show workspaces defined on the same output as the bar
;
; Useful if you want to show monitor specific workspaces
; on different bars
;
; Default: false
pin-workspaces = true

; Create click handler used to focus desktop
; Default: true
enable-click = true

; Create scroll handlers used to cycle desktops
; Default: true
enable-scroll = true

; icon-[0-9]+ = <desktop-name>;<icon>
; NOTE: The desktop name needs to match the name configured by the WM
; You can get a list of the defined desktops using:
; $ xprop -root _NET_DESKTOP_NAMES
icon-0 = 1;
icon-1 = 2;
icon-2 = 3;
icon-3 = 4;
icon-4 = 5;
icon-5 = 6;
icon-6 = 7;
icon-7 = 8;  
;
icon-8 = 9;
icon-9 = 10;
icon-default = 

; Available tags:
;   <label-monitor>
;   <label-state> - gets replaced with <label-(active|urgent|occupied|empty)>
; Default: <label-state>
format = <label-state>

; Available tokens:
;   %name%
; Default: %name%
label-monitor = %name%

; Available tokens:
;   %name%
;   %icon%
;   %index%
; Default: %icon%  %name%
label-active = %icon% 
label-active-foreground = ${color.red}

; Available tokens:
;   %name%
;   %icon%
;   %index%
; Default: %icon%  %name%
label-occupied = %icon%
label-occupied-foreground = ${color.cyan}

; Available tokens:
;   %name%
;   %icon%
;   %index%
; Default: %icon%  %name%
label-urgent = %icon%
label-urgent-foreground = ${color.dark-red}

; Available tokens:
;   %name%
;   %icon%
;   %index%
; Default: %icon%  %name%
label-empty = %icon%
label-empty-foreground = ${color.foreground}

label-active-padding = 1
label-urgent-padding = 1
label-occupied-padding = 1
label-empty-padding = 1