Resistor Color Duo

Welcome to Resistor Color Duo on Exercism's C Track. If you need help running the tests or submitting your code, check out HELP.md.

Instructions

If you want to build something using a Raspberry Pi, you'll probably use resistors. For this exercise, you need to know two things about them:

Each resistor has a resistance value.
Resistors are small - so small in fact that if you printed the resistance value on them, it would be hard to read.

To get around this problem, manufacturers print color-coded bands onto the resistors to denote their resistance values. Each band has a position and a numeric value.

The first 2 bands of a resistor have a simple encoding scheme: each color maps to a single number. For example, if they printed a brown band (value 1) followed by a green band (value 5), it would translate to the number 15.

In this exercise you are going to create a helpful program so that you don't have to remember the values of the bands. The program will take color names as input and output a two digit number, even if the input is more than two colors!

The band colors are encoded as follows:

black: 0
brown: 1
red: 2
orange: 3
yellow: 4
green: 5
blue: 6
violet: 7
grey: 8
white: 9

From the example above: brown-green should return 15, and brown-green-violet should return 15 too, ignoring the third color.

Source

Created by

@wolf99

Contributed to by

@ryanplusplus

Based on

Maud de Vries, Erik Schierboom - https://github.com/exercism/problem-specifications/issues/1464

1.5 KiB Raw Blame History